Adam D. Williams, Alexander A. Solodov, Amir H. Mohagheghi, Philip A. Beeley, Saeed Alameri, “The Gulf Nuclear Energy Infrastructure Institute: A Multidisciplinary Educational Approach for Integrated Nuclear Energy Safety, Security and Safeguards in the Middle East”, Journal of Nuclear Materials Management, 2020 Volume XLVIII, No. 1, 4-21.
Amidu M.A., Addad Y., Riahi M.K., “A hybrid multiphase flow model for the prediction of both low and high void fraction nucleate boiling regimes”,Applied Thermal Engineering,https://doi.org/10.1016/j.applthermaleng.2020.115625
Amidu M.A., Addad Y., “An enhanced model for the prediction of slug flow boiling heat transfer on a downward-facing heated wall”,Annals of Nuclear Energy,https://doi.org/10.1016/j.anucene.2020.107596
Moon J., Jeong Y.H., Addad Y., “Design of air-cooled waste heat removal system with string type direct contact heat exchanger and investigation of oil film instability”,Nuclear Engineering and Technology,https://doi.org/10.1016/j.net.2019.10.010
Alameri S.A., King J.C., Alkaabi A.K., Addad Y., “Prismatic-core advanced high temperature reactor and thermal energy storage coupled system – A preliminary design”,Nuclear Engineering and Technology,https://doi.org/10.1016/j.net.2019.07.028
Kim J.H., Alameri S.A., “Harmonizing nuclear and renewable energy: Case studies”,International Journal of Energy Research,https://doi.org/10.1002/er.4987
Lee M., Lee D., Ko E., Park K., Kim J., Ko K., Sharma M., Cho G., “A Pulse Pileup Correction Method for High Dose Gamma Spectroscopy”,Nuclear Engineering and Technology,https://doi.org/10.1016/j.net.2019.12.003
Ho Joon Yoon , Waleed Al Naqbi, Omar Al Yaihi , Daeseong Jo, ” Validation of RELAP5 MOD3.3 code for Hybrid-SIT against SET and IET experimental data”, Nuclear Engineering and Technology, Feb 2020,https://doi.org/10.1016/j.net.2020.02.007
In Seop Jeon, Ho Joon Yoon, Hyun Gook Kang,” Feasibility estimation of new mitigation system through causal inference analysis with functional model’, Annals of Nuclear Energy, Volume 137, March 2020, 107087.https://doi.org/10.1016/j.anucene.2019.107087
Year 2019
Alrwashdeh M., Alameri S.A., “Reactor Monte Carlo (RMC) model validation and verification in compare with MCNP for plate-type reactor”,AIP Advances,https://doi.org/10.1063/1.5115807
Amidu M.A., Addad Y., “Bubble-induced enhancement of single-phase liquid forced convection heat transfer during subcooled nucleate flow boiling”,Annals of Nuclear Energy,https://doi.org/10.1016/j.anucene.2019.06.001
Al-Nuaimi A., Alameri S.A., Alkaabi A.K., Shimazu Y., “New monitoring procedure of axial xenon oscillation in large pressurized water reactors”,Annals of Nuclear Energy,https://doi.org/10.1016/j.anucene.2018.12.026
Kim S.G., Addad Y., Liu M., Lee J.I., Lee Y., “Computational investigation into heat transfer coefficients of randomly packed pebbles in flowing FLiBe”,International Journal of Heat and Mass Transfer,https://doi.org/10.1016/j.ijheatmasstransfer.2019.118769
Al-Yahia O.S., Yoon H.J., Jo D., “Bubble dynamic parameters during subcooled flow boiling under uniform and non-uniform transverse heat distribution”,International Journal of Heat and Mass Transfer, https://doi.org/10.1016/j.ijheatmasstransfer.2019.118508
You B.-H., Jeong Y.H., Addad Y., “Assessment of advanced RANS models ability to predict a turbulent swept liquid metal flow over a wire in a channel”,Nuclear Engineering and Design,https://doi.org/10.1016/j.nucengdes.2019.110206
Remache A., Addad Y., Sabeur-Bendehina A., Ouadha A., “Thermal design optimization of passive cooling capability in a dry-storage system by adding wall undulations or semi-circular fins”,Nuclear Eng. and Design,https://doi.org/10.1016/j.nucengdes.2019.03.028
Abutayeh M., Addad Y., Abu-Nada E., Alazzam A., “Doping solar field heat transfer fluid with nanoparticles”,of Solar Energy Eng.,https://doi.org/10.1115/1.4041157
Kim D.Y., NO H.C., Yoon H.J., Lim S.G., “Thermal-hydraulic study of air-cooled passive decay heat removal system for APR+ under extended station blackout”,Nuclear Engineering and Technology,https://doi.org/10.1016/j.net.2018.09.006
Alrwashdeh, M., Alameri, S.A., Alkaabi, A.K., “Preliminary Study of a Prismatic-Core Advanced High-Temperature Reactor Fuel Using Homogenization Double-Heterogeneous Method”,Nuclear Science and Eng.,https://doi.org/10.1080/00295639.2019.1672511
Alkaabi, A.K., King, J.C., “Benchmarking COMSOL multiphysics single-subchannel thermal hydraulic analysis of a TRIGA reactor with RELAP5 results and experimental Data”,Science and Technology of Nuclear Installations,https://doi.org/10.1155/2019/4375782
Chen J., Nurrochman A., Hong J.-D., Kim T. S., Yi Y., “Comparison of oxide layers formed on the low-cycle fatigue crack surfaces of Alloy 690 and 316 SS tested in a simulated PWR environment”,Nuclear Eng. and Technology,https://doi.org/10.1016/j.net.2018.10.007
Takahashi S., Kawashima S., Hidaka A., Tanaka S., Takahashi T., “Estimation of the Release Time of Radio-Tellurium During the Fukushima Daiichi Nuclear Power Plant Accident and Its Relationship to Individual Plant Events”,Nuclear Technology,https://doi.org/10.1080/00295450.2018.1521186
Hidaka A., “Formation mechanisms of insoluble Cs particles observed in Kanto district four days after Fukushima Daiichi NPP accident”,Journal of Nuclear Science and Technology,https://doi.org/10.1080/00223131.2019.1583611
Park K., Kim J., Lim K., Kim J., Chang H., Kim H., Sharma M., Cho G., “Ambient Dose Equivalent Measurement with a CsI(Tl) Based Electronic Personal Dosimeter”,Nuclear Engineering and Technology,https://doi.org/10.1016/j.net.2019.06.017
Year 2018
Al Hanaee S., Yi Y., Schiffer A., “Ultimate pressure capacity of nuclear reactor containment buildings under unaged and aged conditions”,Nuclear Engineering and Design,https://doi.org/10.1016/j.nucengdes.2018.05.017
Baghdad M., Ouadha A., Addad Y., “Effects of kinetic energy and conductive solid walls on the flow and energy separation within a vortex tube”,International Journal of Ambient Energy,https://doi.org/10.1080/01430750.2018.1550013
Year 2017
Choi M.K., Lee S.M., Ha J.S., Seong P.H., “Development of an EEG-based Workload Measurement Method in Nuclear Power Plants”,Annals of Nuclear Energy,https://doi.org/10.1016/j.anucene.2017.08.032
Byon Y.-J., Ha J.S., Cho C.-S., Kim T.-Y., Yeun C.Y., “Real-Time Transportation Mode Identification Using Artificial Neural Networks Enhanced with Mode Availability Layers: A Case Study in Dubai”,Applied Sciences,https://doi.org/10.3390/app7090923
Al Mehrzi A., Yi Y., Cho P.Y., Al Saadi S., Lee J.S., Choi D.S., “Deliquescence of NaCl and Atmospheric Corrosion of 316L Stainless Steel”,Advanced Materials Research,https://doi.org/10.4028/www.scientific.net/AMR.1142.8
Addad, Y., Abutayeh, M., Abu-Nada, E., “Effects of Nanofluids on the Performance of a PCM-Based Thermal Energy Storage System”,Journal of Energy Engineering,https://doi.org/10.1061/(ASCE)EY.1943-7897.0000433
Lee W.W., Bae S.J., Jung Y.H., Yoon H.J., Jeong Y.H., Lee J.I., “Improving power and desalination capabilities of a large nuclear power plant with supercritical CO2 power technology”,Desalination,https://doi.org/10.1016/j.desal.2017.01.013
Park Y.J., Kim J.W., Ali G., Kim H.J., Addad Y., Cho S.O., “Fabrication of Uniform Nanoporous Oxide Layers on Long Cylindrical Zircaloy Tubes by Anodization Using Multi-Counter Electrodes”,Nanoscale Research Letters,https://doi.org/10.1186/s11671-016-1774-1
Solodov A., Williams A., Al Hanaei S., Goddard B., “Analyzing the threat of unmanned aerial vehicles (UAV) to nuclear facilities”,Security Journal,https://doi.org/10.1057/s41284-017-0102-5